Orange Glo Hardwood Floor Refinisher is specially formulated to restore the shine and beauty to dull, worn and scratched polyurethane-finished wood floors.

Directions to Refinish Hardwood Floors
1. Clean: Remove loose dirt and grit from your floor and then clean thoroughly with Orange Glo Hardwood Floor Cleaner and mop. Make sure that no dirt remains that could be trapped in the Refinisher, and that hardwood floor is completely dry before you continue to refinish.

2. Apply: Rock container back and forth - don’t shake. Apply the Refinisher in a wide, wavy line on the floor and spread to cover a 4’ x 6’ section.

3. Spread & Smooth: Use only Orange Glo Mop and tan Allura fiber Refinishing Pad to apply the Refinisher. Be sure to dampen pad before refinishing and wash it immediately after use. After applying Refinisher, spread it over a small area at a time. Refinisher should be applied at 500 square feet per quart. For best results, apply an even, consistent coat, keeping airborne dust and airflow to a minimum while floor is wet. Going with the grain of the wood, smooth out the Refinisher, continuing the process until the entire floor is coated. Allow to dry a minimum of 1 hour before walking on coated floors. If desired, a second coat may be applied after 2 hours. Wait 24 hours before allowing heavy traffic and replacing furniture and rugs. Wash Allura fiber Refinishing Pad immediately after use. Refinish up to 4 times per year.

Orange Glo's Refinisher was developed in partnership with Bona Kemi, the world's leader in professional floor finishes. Its self leveling formula uses true polyurethane to fill in scratches and eliminate the dull spots. Now you can get professional results at home. Restore the shine with Orange Glo Hardwood Refinisher.